Embedded Systems, Firmware and PCB Consulting
Practical engineering support for embedded C/C++, STM32, AURIX, PCB design, debugging, code review and technical training.
PhD Electrical Engineering
10+ Years Engineering Experience
Embedded Systems, Firmware and Electronics
Measurement, Test and Debugging Systems
The opinions and information published on this website are my own and do not represent the views of any current or former employer.
How I Can Help
Embedded Firmware Development
Embedded C/C++ development for microcontrollers, drivers, peripherals, board bring-up and hardware-facing software.
STM32 and AURIX Support
Help with STM32 projects, AURIX peripherals, ADC configuration, debugging, code structure and toolchain-related problems.
PCB Design and Review
Schematic review, PCB layout review, component selection, bring-up planning and practical design feedback.
Debugging and Code Review
Analysis of firmware bugs, timing problems, interrupt issues, peripheral configuration mistakes, memory problems and maintainability issues.
Technical Training
One-to-one or team training for embedded C/C++, debugging, microcontroller fundamentals and practical electronics workflows.
Prototype and Project Support
Support for early-stage prototypes, proof-of-concept boards, measurement setups and embedded project planning.
Typical Projects
- STM32 firmware architecture and peripheral bring-up
- AURIX ADC and peripheral configuration support
- Embedded C/C++ code review and refactoring
- PCB schematic and layout review
- Hardware debugging with oscilloscope, logic analyzer and multimeter
- Sensor interface and data acquisition projects
- Technical article, documentation or training material preparation
How I Work
I focus on practical engineering results: clear diagnosis, readable code, hardware-aware debugging and explanations that help you understand the issue instead of only receiving a black-box fix.
- Clear communication
- Practical debugging steps
- Hardware-aware firmware advice
- Clean and maintainable C/C++
- Documentation when useful
- No unrealistic promises
Request Direct Help
Use the email link below to describe your project, problem or consulting request. Include the target MCU or platform, current status, deadline and what kind of help you need.
Email: contact@embedonix.com
Prefer Fiverr?
If you prefer working through the Fiverr platform, you can contact me there as well.
